Product Description
Features Godox TT685C Flash Speedlite with E-TTL II Autoflash + Godox X1C TTL Wireless Remote Flash Trigger for Canon +Godox softbox with S-type speendlite bracket (Bowens mount) and diffuser dimension 40*40 CM + Universal Flash Color Effect Filter+ Pergear Cleaning Kit 1. Godox TT685C Flash Speedlite with E-TTL II Autoflash for CANON EOS DSLR Camera 5D Mark III 5D MarkII 6D 7D 60D 50D 40D 30D 650D 600D 550D 500D 450D 400D Digital 1100D 1000D Description This TT685C camera flash applies to CANON EOS series cameras and is well compatible with E-TTL II autoflash. With this E-TTL II compatible flash your shooting will become simpler. You can easily achieve a correct flash exposure even in complex light-changing environments. In E-TTL II mode the camera and the flash will work together to calculate the correct exposure for the subject and the background. In this mode multiple TTL functions are available: FEC HSS second curtain sync modeling flash etc. Features: 1. GN60 (m ISO 100 @200mm). 22 steps from 1/1 to 1/128. 2. Fully support Canon EOS camera flash. Workable as Master or Slave unit in a wireless flash group. 3. Use dot-matrix LCD panel to make clear and convenient operations. 4. With built-in 2.4GHz wireless remote system to support transmitting and receiving. 5. Provided multiple functions include HSS (up to 1/80 )etc. 6. Stable consistency and color temperature with good even lighting. 7. Support with firmware upgrade. Specification: Model TT685C Guide No. (1/1 output @ 200mm) 60 (m ISO 100) 190 (feet ISO 100) Recycle time Approx. 0.1-2.6 seconds (eneloop Ni-MH batteries of Panasonic). Red LED indicator will light up when the flash is ready. Color Temperature 5600±200k Compatible Cameras Canon EOS cameras(E-TTL II autoflash) Flash Coverage 20 to 200mm (14mm with wide panel) * Auto zoom (Flash coverage set automatically to match the lens focal length and image size) * Manual zoom * Swinging/tilting flash head (bounce flash): 0 to 360° horizontally and -7° to 90 vertically Flash Duration 1/300 to 1/20000 seconds Power Supply AA batteries:Ni-MH batteries (recommended) or 4*LR6 alkaline batteries Exposure Control Exposure control system E-TTL II autoflash and manual flash Flash exposure compensation (FEC) Manual. FEB: ±3 stops in 1/3 stop incremen (Manual FEC and FEB can be combined.) Sync mode High-speed sync (up to 1/8000 seconds) first-curtain sync and second-curtain sync Multi flash Provided (up to 100 times 199Hz) Sync Triggering Mode Hotshoe 3.5mm sync line Wireless control port Dimensions 64*76*190 mm Weight without battery 410g Weight with battery 530g Compatible Camera Models: This flash unit can be used on the following Canon EOS cameras models: 5D Mark III 5D MarkII 6D 7D 60D 50D 40D 30D 650D 600D 550D 500D 450D 400D Digital 1100D 1000D Note: The above only lists the tested camera models not all Canon EOS series cameras. For the compatibility of other camera models a self-test is recommended. 2.Godox X1C TTL Wireless Remote Flash Trigger for Canon Description This TTL wireless flash trigger can be used with a transmitter and one or more receivers for studio flash speedlite and camera shutter. Featuring multi-channel triggering stable signal transmission and sensitive reaction it gives photographers unparalleled flexibility and control over their strobist setups. The flash trigger applies to hotshoe-mounted Canon EOS series cameras as well as the cameras which have PC sync sockets.With X1C wireless flash trigger high speed synchronization is available for most of camera flashes in the market which support E-TTL II. The max flash synchronization speed is up to 1/8000s. 1/8000s is achievable when the camera has a max camera shutter speed of 1/8000s. 1/8000s is not achievable because some models of Canon EOS cameras have a max camera shutter speed of only 1/4000s. The flash trigger features the following functions: 1. As a Wireless Studio Flash Trigger 2. As a Wireless Speedlite Trigger 3. As a Wired Shutter Release 4. As a Wireless Studio Flash Trigger or Speedlite 5. Trigger with PC Sync Socket Attentions 1. Unable to trigger flash or camera shutter. Make sure batteries are installed correctly and Power Switch is turned on. Check if the transmitter and the receiver are set to the same channel if the hotshoe mount or connection cable is well connected or if the flash triggers are set to the correct mode. 2. Camera shoots but does not focus. Check if the focus mode of the camera or lens is set to MF. If so set it to AF. 3. Signal disturbance or shooting interference. Change a different channel on the device. 4. Operating distance limited or flash missing. Check if batteries are exhausted. If so change them. 5. No or is displayed on the camera viewfinder though the camera is mounted on the transmitter and the power switch is turned on. This is resulted from unusual working of the transmitter. Check and make sure the flash trigger is well connected to the camera through Hot Shoe Camera Connection then power the Transmitter on again. Specifications: Model X1C Type For Canon Compatible Cameras Canon EOS cameras (E-TTL II autoflash) Support for the camera that have PC sync socket Built-in remote system 2.4G wireless transmission Modulation mode MSK Power supply 2*AA batteries Exposure Control ã Manual Flash Yes TTL autoflash E-TTL II TTL control ã High-speed sync Yes Flash exposure compensation Yes ±3 stops in 1/3 stop increments Flash exposure lock Yes Focus assist Manual open Second curtain sync No Modeling flash Yes fired with camera’s depth-of-field preview Wireless flash ã Wireless function in TTL mode Ratio Off in M mode Flash Ratio(A:B C) Support for GR group flash A-E group can set their flash mode separately Controllable slave group in the GR grouping mode 5(A/B/C/D/E) in the ratio grouping mode 3(A/B/C) Transmission range(approx.) ï¼100m Channel 32 Others ã Synchronization delay set Yes(0-100ms use 100us as the unit) Wireless shutter release Receiver can control camera shooting through 2.5mm sync port ZOOM setting Adjust the flash’s focal length through the transmitter LCD panel Wide LCD panel backlight on/off Output interface Transmitter: use a PC cord to input and output Receiver: use a 2.5mm sync cord to output Firmware upgrade Use the Micro USB port to upgrade Memory function Settings will be stored 2 seconds after last operation and recover after a restart Dimension/Weight for Transmitter 72x75x52(mm)/100g Dimension/Weight for Receiver 70x65x47(mm)/70g 3. Godox softbox with S-type speendlite bracket (Bowens mount) and diffuser dimension 40*40 CM Description: It is a softbox for photographer making the light softer. And this softbox is compatible with lots of different type flash. Also there is a carry bag for user carrying the softbox easily. Feature: 1. Silver reflective internal face for gathering the light. 2. S-type speedlite bracket is compatible with lots of different type flash such as GODOXï¼V860IIC V860IIN V860S V860C V860N YONGNUO YN685 YN565EX YN-568EXN YN560IV and MEIKE MK910 MK600 and so on. 3. If user don’t want to use the softbox there is Bowens mount in front of the S-type speedlite bracket user can use other accessories with Bowens mount for example Bowens-mount softbox reflector snoot photo umbrella beauty dish and barndoor kit. 4. There are two diffuser in the package in order to make the light softer. 5. There is a carrying case with softbox for user in order to storage and carry easily. Specification: Softbox dimension: 40*40 cm Compatible Models GODOX: V860IIC V860IIN V860S V860C V860N V850II V850 TT685S TT685C TT685N TT600 TT600S YONGNUO: YN685 YN565EX YN-568EXN YN560IV YN600EX-RT YN-565EXII/C YN467II and so on MEIKE: MK910 MK600 MK950C MK950N MK580 and so on 4. Universal Flash Color Effect Filter This Universal Flash Color Effect Filter Kit adds artistic and theatrical color to your images. Including 12 color filters – Purple Orange Red Blue Green Yellow etc… (see above picture) You can use single or combinations of these filters for a lot color of light largest selection for controlling light color on different scene. These filters can be installed on flash through a Velcro strap for quickly fastening to the flash unit and fits most of flashlight on the market. Ideal for enhancing skintone in portraits color correcting or matching ambient simulating different kinds of light special effects cheating white balance and a whole lot more! Specification: 12 color filters – Purple Orange Red Blue Green Yellow etc… (see above picture) Velcro Strap Length: 23cm Total weight: 36g 5. Pergear Cleaning Kit: Micro fiber Lens Cloth+ Antistatic Gloves+Cleaning Brush with Lipstick Style This 3 in 1 Pergear Cleaning Kit is really excellent with high quality micro fiber Lens Cloth lipstick-style cleaning brush featuring strong dust extraction causing no damage to the monitor and screen surface; And antistatic gloves working well when handling monitors and screens to prevent fingerprints and scratching. Package
Reviews
There are no reviews yet.